THE
PROBLEM
Today, approximately 60% of all Automated Teller Machines (ATMs) use Plain Old
Telephone Service (POTS) to deliver banking services. Most ATM manufacturers
are aggressively promoting a wholesale change out of equipment to newer IP-enabled
devices because POTS services are weak on uptime, transport security, redundancy
and remote maintenance capabilities. Also, Carriers in North America are phasing
out POTS, which will result in most of these circuits to be eliminated by 2015.
This leaves the customer with a major decision. Either go for the expensive,
disruptive change out of equipment today or upgrade network connectivity for
existing ATMs and change on their own time frame. The problem then becomes how
do they move these copper based ATMs to the more reliable, lower cost transport
and take advantage of new IP-based services without the wholesale change out
of equipment.
THE SOLUTION
The solution is the Encore Networks Copper
To Cell (C2C™) portfolio. The C2C™
is ideally suited for legacy ATM applications
that currently depend on analog modems
and POTS line services. The C2C™ uses
an embedded Verizon Wireless 2G or
3G cellular modem and integrated Central
Office modem to easily move ATMs to
a secure, reliable IP-based solution.
The customer need not change any equipment
in the field, thus preserving their
invested CAPEX. The C2C™ also provides
IP-based Ethernet services through
its Ethernet port at any time, allowing
additional services to be delivered
while maintaining the analog based
equipment. By moving to the C2C™ IP-based
platform, additional services can be
delivered, backup data and alarms can
be transported simultaneously to multiple
host data centers. The C2C™ provides
increased transport security using
IPSec VPN with 3DES or AES encryption.
For large installations multiple units
can be configured from a central location
via Encore’s Config Server which programs,
updates and maintains thousands of
units, requiring no senior technical
service people in the field.
APPLICATION DIAGRAM
TECHNICAL
SPECIFICATIONS
Physical Interfaces
• WAN/LAN Connectivity:
• One 10/100 Ethernet w/ Auto Failover
• One CO Modem RJ11
Connectivity
• Data Modem Port
• Bell103, Bell212, V.21, V.22, V.22 bis, V.23,
V.32, V.32 bis, V.34
• LS/GS
• Polarity Reversal
• V.42 with Error Correction - MNP 2-4
• V.42 bis w/ Data Compression & MNPS
• Rotary/DTMF
• IP - Ethernet
• TCP, UDP/RTP Data Transport
• RTP Packet Optimization
• DLCI IP configuration
• Telnet (Client or Server)
• TCP Port configuration
• TCP Broadcast
• Wireless - Embedded
• Integrated Wireless modem supports 2G/3G Wireless
Cellular data networks
• 1 External Antenna / 1 Internal Diversity
Antenna (3G)
Management
• Manageable via SNMP
• Remote or Local Access
• Telnet
System Features
• SNMP Alarms / Traps
• Password Security
• User Friendly interface
• Alarm Reports
• Syslog
Security and
Routing
• IP Authentication
• Call setup authentication
• Unit Authentication
• User Passwords
• Standard Encryption 3DES/AES 256
• IPSec
• Firewall (Layer 4)
• SSL Pass Through
• Standard Routing Protocols
Network Support
• IP Wireless
• Cellular Data
• IP Satellite
• IP Terrestrial
• Private or Public Networks
Electrical Specifications
• Power Supply
Options:
• 3.5 watts nominal
• 7.5 watts maximum with embedded cellular modem
• AC: 100-240VAC, 50-60Hz
Environmental
• Environment:
• Temperature:
- Commercial
grade: 0° C to +50° C
- Non-Operating:
-40° C to +85° C
• Humidity: 5% to 95% non-condensing
• Altitude: Up to 10,000 ft. (3048 m)
• Mechanical:
• Height: 1.2 in. (3.05 cm)
• Width: 4.3 in. (10.92 cm)
• Depth: 2.8 in. (7.11 cm)
• Weight: Less than 1 lb. (< 0.45 kg)
• Installation Type: Desktop/Shelf
• Standards Compliance:
• RoHS Compliant
• PCI Compliant
• Product Safety
- UL/CSA 60950-1
- CAN/CSA-C22.2
No. 60950-1-03
- EN 60950-1
• EMC
- FCC Part 15
- EN 55022: 1998
- EN 55024: 1998
• NERC CIP (003, 005, 007, 009)
• Part Number: C2CME-0000-0000-0 |
