| Industrially Hardened And Commercial Grade Security Appliance |
|
|
BANDIT II™, the latest addition to the Encore’s BANDIT™ (Broadband Access Network Device for Intelligent Termination™) family, is available as an industrially hardened or commercial grade cyber security appliance with integrated router, firewall, terminal server, serial-to-IP conversion, legacy-protocol conversion, and VPN functionality. Ideally suited for lottery, banking (ATM), electric, gas, oil and water utilities, industrial plant floors; mobile transportation; and traffic control system applications, the BANDIT II™ ensures secure system data and SCADA network connections directly to the Internet, secure Wide Area Network (WAN) and/or Local Area Network (LAN), or commercial cellular data IP services. With its seamless Host Site diversification failover feature, the BANDIT II™ is ideal for Disaster Recovery and Application Load Sharing to multiple Host Sites. |
|
Summary Points
► Available in industrially hardened and commercial grade versions
► IPSec or SLE for enhanced VPN over satellite networks
► Manageability (Remote Monitoring and Configuration)
► Multi Network connectivity over any network including Frame Relay and IP
► Cellular connectivity for primary, load sharing, back-up or out-of-management support
► Up to 2 serial ports for legacy traffic
► Host Site Diversification for Disaster Recovery |
| |
| Application Diagram |
 |
| |
| TECHNICAL SPECIFICATIONS |
| |
General Features
► Protocol management (spoofing) and translation
► NERC CIP-compliant security
► Secure Wireless Cellular connection
► SNMP manageability (Monitoring and Configuration)
► Operating System (OS) and Configuration Servers
► Disaster Recovery and Load Sharing
► QoS Enforcement |
| |
Security Appliance Features
► Integrated router/firewall/VPN
► NAT, PrAT, eNAT-T
► VPN (up to 30 simultaneous tunnels) |
● IP Sec (RFC 2401) with DES (56 bit), 3DES (168 bit) and AES (256 bit)
● GRE (RFC 1701)
● SLE (Selective Layer Encryption)
|
| |
Protocols
► WAN Serial |
● Frame Relay
● Asynchronous and Synchronous PPP
● MLPPP
● X.25
|
| ► IP Ethernet |
● IP Routing (RIP v1/v2) or Static Routing
● IPSec and SLE VPN
● VPN Split Tunneling
● DHCP Client/Server/Relay/BootP
● IP QoS and traffic prioritization
● VRRP (RFC3768)
● VLAN
● 802.1q VLAN tagging
|
| |
Serial Legacy Support
► One DB25 port
► Supports multiple asynchronous and synchronous legacy protocols
► Pass through support for DNP3, IEC 60870-5-101/103/104, MODBUS, CDC, S/NET, CONITEL, ABB, and most electrical industry proprietary protocols
► One DB9 serial console port supporting EIA/TIA RS232 |
| |
Physical Ports
► Serial |
● 1 DB25 port (RS232) User port
● 1 DB9 port (RS232) console or User port
|
| ► Ethernet |
● 2 10/100 BASE TX
|
| ► Optional |
● CDMA 1xRTT, EVDO
● GSM EDGE, HSDPA
|
| |
Electrical
► Power Supply Options |
● 10 watts maximum
● DC: 12VDC, 24VDC, 48VDC
● AC: 100-240VAC, 50-60Hz (with external adapter
|
| |
Environmental
► Temperature: |
● Industrially hardened: -40° C to 85° C - DC -30° C to 70° C - AC
● Commercial-grade: 0° C to 50° C
● Cellular Wireless: -20° C to 65° C
● Non-Operating: -40°C to 85°C
|
► Humidity: 10% to 85% non-condensing
► Altitude: Up to 10,000 ft. (Up to 3048 m) |
| |
Mechanical
► Height: 1.5 in. (3.81 cm)
► Width: 6.0 in (15.24 cm)
► Depth: 4.4 in. (11.18 cm)
► Weight: Less than 1 lb. (Less than 0.45 kg)
► Installation Type: Desktop |
| |
Standards Compliance
► Safety: ANSI/UL Std. No. 60950-1, 1st Edition (2003)
CAN/CSA C22.2 No. 60950-1-03
IEC/EN 60950-1: 2001
► Emissions: FCC Part 15, Sub-Part B, Class A (U.S.)
EN 55022: 1998 (Europe)
► Immunity: EN 55024: 1998 (Europe)
► Environmental: RoHS Compliant |
| |
|
| |
 |
Front |
| |
 |
Back |
| |
|
Specifications subject to change |
|
|
|
