 |
|
| |
| SignalPath™ 201-SA
Universal Signaling Adapter |
|
|
|
|
The
SignalPath 201-SA™ is a signaling
adapter that is universally compatible
with a comprehensive set of enterprise
and CPE (customer premises equipment) PBXs,
IP-PBXs, video conferencing, media gateways,
and multi-service access devices. Enterprise
vendors with customers that require connectivity
between their PBX applications and networks
in countries using legacy signaling protocols
are rewarded with immediate business opportunities
that were previously inaccessible due to
signaling incompatibilities in the networks. |
PDF
Data Sheet
FAQs
Application Notes
Documentation
Product Info
Request Form
Country Protocol
List
Signalling Product
Matrix |
|
| INTERNATIONAL
PROTOCOL SUPPORT |
|
KEY
BENEFITS |
| |
|
|
| ► |
R2
to ETSI ISDN |
| |
|
| ► |
DTMF
to ETSI ISDN |
| |
|
| ► |
ANSI
NI2 ISDN to R2 |
| |
|
| ► |
ANSI
NI2 ISDN to DTMF |
| |
|
| ► |
DTMF
to IDA-P (Hong Kong) |
| |
|
| ► |
Plus,
a wide variety of custom variants |
|
|
| ► |
Economical
solution for bridging CAS and ISDN
networks |
| |
|
| ► |
Compact
design for easy co-location with PBX
equipment |
| |
|
| ► |
Up
to four T1/E1 interfaces |
| |
|
| ► |
Standard
BNC and RJ48 interfaces |
| |
|
| ► |
Flexible
port connections |
|
|
|
|
| LOW
COST PBX TO CAS SOLUTION |
| |
The
SP201-SA, designed for fast, easy, economical
integration of CAS and ISDN networks,
quite simply connects PBX type equipment
with a digital T1 or E1 interface to
legacy signaling equipment with a digital
T1 or E1 interface over the PSTN. |
|
| COMPACT
DESIGN |
| |
The
SP201-SA is an extremely compact
unit (1.7 x 9 inches and weighing
only 1.5 lbs.) designed for limited
space. It is easy to co-locate with
existing PBX equipment. Available
in both 2-port and 4-port models,
it provides the ability to connect
T1 or E1 trunks through either two
or four physical interfaces. |
|
| EASY
INSTALLATION AND
MANAGEMENT |
| |
Software-selectable
menu options for connections simplify
installation and reduce operating
costs. Standard RJ48 and BNC interfaces
provide T1 and E1 connectivity to
equip ment at the customer premises. |
|
|
STANDARD INTERFACES |
|
|
| ► |
RJ48 connector for T1 |
|
|
| ► |
RJ48 connector for E1-120 ohm |
|
|
| ► |
BNC connector for E1-75 ohm |
|
| FLEXIBLE
PORT CONNECTIONS |
| |
|
| ► |
T1
to T1 |
| |
|
| ► |
E1
to E1 |
| |
|
| ► |
T1
to E1 |
| |
|
| ► |
2
T1 to E1 |
| |
|
| ► |
2
T1 to 2 T1 |
| |
|
| ► |
2
E1 to 2 E1 |
|
|
|
| |
| Specifications |
| Architecture |
|
High performance RISC-based
processor |
| |
|
|
| Port
Interfaces |
|
| 2-port model: |
|
1
T1 to 1 E1 (BNC or RJ48); 1 T1 to
1 T1; 1 E1 (BNC) to 1 E1 (RJ48); 1
E1 to 1 E1 (both RJ48); 1 E1 to 1
E1 |
| |
|
|
| 4-port model: |
|
2
T1 to 1 E1 (BNC or RJ48); 2 T1 to
2 T1; 2 E1 to 2 E1 (both RJ48); 2
E1 to 2 E1 |
|
| |
|
|
| Interface
Specifications |
|
| Framing: |
|
E1
G.732/G.704; T1 D4SF/D4ESF |
| |
|
|
| Bit rate: |
|
E1
2.048 Mbps; T1 1.544 Mbps |
| |
|
|
| Clocking: |
|
E1 ± 30
ppm internal; E1 ± 100 ppm
external; T1 ± 30 ppm internal;
T1 ± 150 ppm external |
| |
|
|
| Impedance: |
|
E1
120 ohm balanced; E1 75 ohm unbalanced;
T1 100 ohm balanced |
| |
|
|
| Coding: |
|
E1
AMI or HDB3; T1 AMI or B8ZS |
| |
|
|
| Alarms: |
|
E1
loss of carrier signal, multi-frame
carrier signal, sync; alarm indication
signal (AIS); receipt of remote alarm;
receipt of multi-frame remote alarm
T1 loss of carrier signal; loss of
frame; receipt of alarm indication
signal (AIS); receipt of remote alarm |
| |
|
|
| Diagnostics: |
|
E1/T1
signaling state report; digit report |
| |
|
|
| Performance: |
|
E1
G.703, G.704, G.732, G.823; T1 ATT
Pub. 6241 |
|
| |
|
|
| Standards
Conformance |
|
| R2: |
|
Q.400–Q.490 |
| |
|
|
| DTMF: |
|
Bellcore
TR-TSV-002275, Subsection 6.13 |
| |
|
|
| ETSI ISDN: |
|
ETSI
300–102, Q.931, Q.921 |
| |
|
|
| ANSI NI2 ISDN: |
|
Bellcore
TR-NWT-001268, TR-NWT-002343; Q.931,
Q.921 |
|
| |
|
|
| Physical
Specifications |
|
| Size: |
|
height:
1.7 in. (4.32 cm); width: 8.36 in.
(21.34 cm); depth: 9.0 in. (22.86
cm); weight: 1.5 lb. (.68 kg) |
| |
|
|
| Power (external): |
|
100
to 240 VAC, 50-60 Hz |
| |
|
|
| Temperature: |
|
32° to
104° F (0° to 40° C) |
| |
|
|
| Humidity: |
|
10%
to 85% non-condensing |
| |
|
|
| Altitude: |
|
Up
to 10,000 ft. (3,048 m) |
|
| |
|
|
| Agency
Compliance |
|
| Safety: |
|
EN
60950, European Safety (CE Mark) |
| |
|
|
| Emissions: |
|
UL
1950 3rd Edition, U.S. Safety; FCC
Part 15, Sub-part B, Class A |
| |
|
|
| Immunity: |
|
EN
55024; 1998 |
|
|
|
|
|
|
| |
|
|
